Inverter setup question
I just installed a Magnum Energy MS2812 PSW Inverter and one of the setup parameters was low battery cut off voltage setting. I set it for 11 volts, after thinking 10.5 might be too low. Don't know if...
Forum Discussion
I would set at 11.5, maybe as low as 11.0
Certainly something lower than 12.0
As stated running voltage under load, is less than actual low voltage at rest aka state of charge
Batteries are a consumable product, if you dry camp they, will need replacing at some point in time, it's use and replace !
But good care and management can help mitigate the costs
Certainly something lower than 12.0
As stated running voltage under load, is less than actual low voltage at rest aka state of charge
Batteries are a consumable product, if you dry camp they, will need replacing at some point in time, it's use and replace !
But good care and management can help mitigate the costs
