Is this a bad circuit board? (fridge)
Its the type that uses the resistance probe. Which is all fine and dandy. I have not measured the ohms but assume its measuring accurately. Lets pretend the temp probe was hanging off the fins. Re...
Forum Discussion
Found the answer!! Want to play along and try to guess?
To recap im used to seeing those spikes every couple hours. The air temp drops when the electric element turns on.
What confused me is that big curve in the middle. My first thought was that my circuit board might be failing, because it appeared to go 10 hours without the electric element turning on.
That was wrong. The graph below shows what really happened. Do ya see it?
Hint: the graph below shows more info than the graphs in post #1
To recap im used to seeing those spikes every couple hours. The air temp drops when the electric element turns on.
What confused me is that big curve in the middle. My first thought was that my circuit board might be failing, because it appeared to go 10 hours without the electric element turning on.
That was wrong. The graph below shows what really happened. Do ya see it?
Hint: the graph below shows more info than the graphs in post #1
