I've got a dremel with a drill type chock which can clamp down on super tiny drill bits which should get through the potting, but still, if the POT thing is flat to the PCB, I see problems.
Mad scientist time. How about two regulators, one set to 14.4v, one set to 13.6v and flip a switch to choose either voltage?
Not much luck finding a red VR connector, all I see is the SMP s94
http://www.rockauto.com/catalog/moreinfo.php?pk=50395&cc=1126156&jnid=1198&jpid=1Looks like junk.
I think I'd rather crimp and solder and adhesive line heatshrink my Own female quick connects and figure out some strain relief so they cannot pull off without extreme effort.
