Leak between Awning holder and RV
I have a 2006 Itaska Navion Motorhome. There is a 1 inch foam rubber seal between the awning and the foor of the RV. At one time it appears the out side edges of the foam rubber suppose to stick to th...
Forum Discussion
The awning is a Horizon model that lag bolts to the side of the motorhome just below the gutter. The bolts thread into aluminum structure behind the sidewall.
Here is the installation and operating instructions for it.
http://bryantrv.com/docs2/docs/operating/aehorizon.pdf
OP may have to remove the entire awning from the MH, clean the area, and install new foam. I am not real familiar with this as my '07 View (same MH) had the awning removed before I bought it and I never reinstalled one.
Charles
Here is the installation and operating instructions for it.
http://bryantrv.com/docs2/docs/operating/aehorizon.pdf
OP may have to remove the entire awning from the MH, clean the area, and install new foam. I am not real familiar with this as my '07 View (same MH) had the awning removed before I bought it and I never reinstalled one.
Charles
