Leaky sllide at bottom, fix suggestions?
I found my slide is leaking. I think I found the problem. I'm not sure I have a solution, short of ordering a new rubber wiper from the manufacturer. I'm looking for short term suggestions. Duct t...
Forum Discussion
Tape didn't seem to work. The manufacturer didn't get back to me yet, but the person I need to contact could be on vacation.
Here's what I'm thinking:
1) Put the slide in
2) Mark a line 1/2" from the edge of the wall on the bottom of the slide.
3) Install aluminum angle along that 1/2" line.
4) Get a 1" bulb seal and glue it to the aluminum angle.
Does anyone have a better idea? I can at least start looking for materials while waiting for the manufacturer to get back to me....
Here's what I'm thinking:
1) Put the slide in
2) Mark a line 1/2" from the edge of the wall on the bottom of the slide.
3) Install aluminum angle along that 1/2" line.
4) Get a 1" bulb seal and glue it to the aluminum angle.
Does anyone have a better idea? I can at least start looking for materials while waiting for the manufacturer to get back to me....
