LED Tailight Weak Flashing Issue - *Solved*
***not sure if "taillight" or "tail light" is correct" as I've seen both... Item in question is the Bargman series 84 light set with the 47-84-420 LED part #. Just one side has the issue of an i...
Forum Discussion
MEXICOWANDERER wrote:
Apply independent + - feed to lamp, What happens?
That was going to be my next action, but knowing that the 12 volt test light probe touching the connection in parallel convinces the LED light to operate normal, I thought that the extra load applied (test light) might be a factor.
I scrounged a small resistor (30 ohms) and added it in in series with the problem LED and it works normal. Just not sure if his is an acceptable fix.
