LED Tailight Weak Flashing Issue - *Solved*
***not sure if "taillight" or "tail light" is correct" as I've seen both... Item in question is the Bargman series 84 light set with the 47-84-420 LED part #. Just one side has the issue of an i...
Forum Discussion
MEXICOWANDERER wrote:
Use the resistor. The lamp's VOLTAGE REGULATOR is malfunctioning and sensing what it believes to be too high of incoming voltage. So it drastically limits current.
I would suggest "overkill city" with the resistor. Lots of wattage rating.
With my home built third brake light systems I enable the lamp for 5 minutes continuous operation. Then gingerly touch fingertip to resistor. If I yell unprintable words, I up the wattage rating.
Thanks for your expertise. I'm going to try a new light fixture and be done with it...hopefully.
