Lesson learned lol
Well I pulled the rod out of the hot water heater the end of last season to drain the hot water tank. Seems I should have put back in after it was empty. I just tried to scare it back in and it is so ...
Forum Discussion
Shwthomas1975 wrote:
You guys are awesome. A tap would definitely help. I’ll call local hardware store to see if they have it, if not order from amazon. Thanks for the link. Are they all the same size? 3/4” 14 npt? I use teflon tape with it usually. I have tried by hand, with socket, pliers etc. I can get it to the point where it’s stick hand tight. Barely on the threads but then just slips right off.
All with an anode rod are that size. Be very careful getting a tap started, you don't want to start a new thread or crooked thread.
