Li batteries at 48vdc
After much deliberation and questions, I'll likely be purchasing the 48v Lithium battery pack instead of 4-12v. I liked the idea of 12v batteries for weight and ease of handling, but the possible cel...
Forum Discussion
2oldman wrote:N8GS wrote:When I set it low, then rebulk shows the same value, and I cannot change it. I'll try again.
Try setting float very low and Rebulk to a value you like. All the info I have seen says to avoid floating LFP. So using Rebulk makes more sense to me.
Gale
My 48v pack says right on the case "float 55.2"
You might want to quiz your supplier as to the need to float.
If float and Rebulk are the same maybe its not a problem. Try it and see. It can't hurt to do a monitored test run. Set them both to 55.2 and fire up the microwave or a heater and watch the Outback display to see what happens when the voltage drops to 55.2.
