Lifepo4 float setting?
I have not had to deal with a float setting so far with PWM controllers but I have a Victron 75/15 coming tomorrow and reading up on the settings,it is confusing especially the float setting..Some say...
Forum Discussion
2oldman wrote:jaycocreek wrote:My controller allows, if I remember correctly, a minimum setting of one minute. That shouldn't hurt anything. Tried youtube for these unknown batteries?
I would just turn off float if it was possible...But not being possible,
The unknown battery is a Enjoybot 100ah which I should have stated..Will P says there a clone of the Amperetime and Zooms but there not having different brand cells(Gotion)...There's not many video's on them other than tear downs but nothing about settings..
I just assume the Victron 75/15 will not allow the float to be off from what I have read..I guess I will find out tomorrow.
Since I decided to use a LFP as a house battery in my TC,it was time to upgrade the controller and ad another rigid panel to the roof for 200 watts fixed and 200 portable for my other LFP batteries.
One never knows unless he asks the question.
