Lifepo4 float setting?
I have not had to deal with a float setting so far with PWM controllers but I have a Victron 75/15 coming tomorrow and reading up on the settings,it is confusing especially the float setting..Some say...
Forum Discussion
“3 tons 5% would make current not tapered down to full yet But you do get balancing that needs Full first (how full?) so I am missing something.”
Consider that the battery is an independent entity of the SOC meter, thus a 100% SOC meter readout is a simulation of the battery’s actual SOC…However, Meter validation can be achieved by the ‘short interval’ between it’s 100% readout (following brief holding time…) vs the actual start of BMS cell-balancing phase…
Thus (per my previous…) for LFP experienced folks, I mostly see this topic as overwrought (or really, much to do about nothing)…JMHO
3 tons
Consider that the battery is an independent entity of the SOC meter, thus a 100% SOC meter readout is a simulation of the battery’s actual SOC…However, Meter validation can be achieved by the ‘short interval’ between it’s 100% readout (following brief holding time…) vs the actual start of BMS cell-balancing phase…
Thus (per my previous…) for LFP experienced folks, I mostly see this topic as overwrought (or really, much to do about nothing)…JMHO
3 tons
