Link To Good Value .315" 4 to 1 Heat Shrink Tubing
http://www.ebay.com/itm/151786109371?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
.250" is 1/4" and .375" is 3/8" so this stuff in t'ween.
.315 max shrink down to .079" or around 1/12" inch
Black, medium wall, adhesive lined. Good for 8-gauge and smaller. Good reinforcement for discrete component leads, gross diameter differences. Four to one is normally pretty pricey. These are thirty nine point six inch lengths, not four feet.
.250" is 1/4" and .375" is 3/8" so this stuff in t'ween.
.315 max shrink down to .079" or around 1/12" inch
Black, medium wall, adhesive lined. Good for 8-gauge and smaller. Good reinforcement for discrete component leads, gross diameter differences. Four to one is normally pretty pricey. These are thirty nine point six inch lengths, not four feet.
