Magnum inverter, Yamaha Generator
For anyone that is curious... A recent thread came up about about abnormal charging from a Magnum inverter, using a Yamaha generator as the AC input. My Magnum is a Magnasine MS2812, software versi...
Forum Discussion
My main issue here is not the load start synchronization but the zero interlink communications of ONE ELECTRONIC GENERATED SIGNAL SINE WAVE which would insure
Remaining compatible with another.
Please explain to me how any switched sine wave device could recognize, analyze, and auto-fault if necessary if an incoming sine wave became mis-shaped (distortion), while subject to lead-lag source destination push or pull.
This requires a software management program. Am I missing something here/
Remaining compatible with another.
Please explain to me how any switched sine wave device could recognize, analyze, and auto-fault if necessary if an incoming sine wave became mis-shaped (distortion), while subject to lead-lag source destination push or pull.
This requires a software management program. Am I missing something here/
