Mean Well power supply for my usage
I've been reading old threads for a couple of hours. I'm fairly sure a Mean Well p.s. can do what I want to do, but I'd appreciate if one of you early adopters can point me to a specific model, etc. ...
Forum Discussion
For example, on a 215Ah bank at 50%, it will start around 13v / 46a. During the 15 minute thing, volts will rise to about 14. The unit shuts down, then comes on and continues from where it left off. At some point later (I would have to check my notes) amps will begin to taper, but the volts might be somewhere around say 14.3. The volts finally get to my 14.8 setting right around the time amps level out.
So, it's no longer in cc, seeing as the amps are tapering, but it's also not in cv.
But isn't that kinda what your 1093 does?
So, it's no longer in cc, seeing as the amps are tapering, but it's also not in cv.
But isn't that kinda what your 1093 does?
