Messed up and need some wisdom about Torquing
I messed up, like nobody has ever done before, right? Looking for little bit of wisdom. It was time to adjust my transmission bands. I drained the fluid and removed pan. I went to go get my inch...
Forum Discussion
12 inch/lb = 1 ft/lb
72 inch/lb = 6 ft/lb
I would doubt your larger torque wrench will be capable of going that low, accurately. You would want 6 lb. on the end of a 12" wrench.
Jose
72 inch/lb = 6 ft/lb
I would doubt your larger torque wrench will be capable of going that low, accurately. You would want 6 lb. on the end of a 12" wrench.
Jose
