microair easy start results
Well, here is a summary of the microair easy start on my coleman MachIII 13.5KBTU AC. First, the current results before installation. I had the supco soft start cap along with a 10 second time de...
Forum Discussion
time2roll wrote:
If my thermostat is set to "fan on" and just the compressor cycles how will that affect the learning and operation of the Easy Start?
Far as I know the Easy-Start has no knowledge of the fan, it only connects to the compressor. It simply has a few second start delay, so as soon as thermostat calls for cooling and turns on the fan and compressor relay's the fan starts immediately and the the Easy-Start ramps up after a few seconds, spreading out the fan and compressor startup which also helps with the startup surge beyond what the Easy-start is doing for the compressor.
