microair easy start results
Well, here is a summary of the microair easy start on my coleman MachIII 13.5KBTU AC. First, the current results before installation. I had the supco soft start cap along with a 10 second time de...
Forum Discussion
Hi time2roll,
Nope it learns on the first five starts only. If you move the unit to another air conditioner there is a way to have it learn the new one.
Their detailed reply to me above indicated that the new unit (i.e. not black) would do the learning inclusive of the 5 minute delay. Their web site specifies a 4 minute delay--but that could be a typo.
Can't answer the "fan on" but I think the idea is to maximize the surge and minimize the voltage drop during the learning process.
Nope it learns on the first five starts only. If you move the unit to another air conditioner there is a way to have it learn the new one.
Their detailed reply to me above indicated that the new unit (i.e. not black) would do the learning inclusive of the 5 minute delay. Their web site specifies a 4 minute delay--but that could be a typo.
Can't answer the "fan on" but I think the idea is to maximize the surge and minimize the voltage drop during the learning process.
time2roll wrote:
Does Easy Start continue to learn each time or is it just fixed once the initial starts are complete?
Can the learning take place with normal cycling or is it better to manually cycle the equipment?
If my thermostat is set to "fan on" and just the compressor cycles how will that affect the learning and operation of the Easy Start?
Thanks again to the OP for posting data and thanks to the ES rep for posting real answers to the technical questions.
