GordonThree wrote:
Westend,
I've been experimenting with building my own, the latest generation is shown running the LED a few posts back. The board is of my own design, and I have them fabricated by an outfit called OSH Park and then I hand assemble on my work bench.
Here's four of them assembled but not cut apart yet:
This latest generation I'm pretty happy with... the cost in parts is about $10, not including time.
If I need something off the shelf, I like drivers from LED Dynamics; namely the Buckpuck driver. They are available from most electronics supply houses, as well as LED shops.
Thanks Gordon. Those last ones look like a fairly good board.
