GordonThree wrote:
Westend,
I've been experimenting with building my own, the latest generation is shown running the LED a few posts back. The board is of my own design, and I have them fabricated by an outfit called OSH Park and then I hand assemble on my work bench.
Here's four of them assembled but not cut apart yet:
This latest generation I'm pretty happy with... the cost in parts is about $10, not including time.
If I need something off the shelf, I like drivers from LED Dynamics; namely the Buckpuck driver. They are available from most electronics supply houses, as well as LED shops.
How is the RFI factor. I'm sure you addressed it but my eyes are too weak to discern the parts numbers :)
