More Schwintec problems
I spent a lot of time replacing one motor, rack and parts on one end, controller. etc..... It worked for a while now when trying to open it moves about one half inch and stops. It will reverse with no...
Forum Discussion
As I understand it, the override also puts fill battery voltage on the motors. When in sync'd mode the motors don't get full voltage and may not be able to overcome some resistance.
Just yesterday my bedroom slide wasn't fully closing. I discovered that one of the rubber wipes was getting wrapped around a bottom roller - I cut it away and end of problem (except for the fact that part of the wipe is missing).
Just yesterday my bedroom slide wasn't fully closing. I discovered that one of the rubber wipes was getting wrapped around a bottom roller - I cut it away and end of problem (except for the fact that part of the wipe is missing).
