Forum Discussion
full_mosey
Jun 06, 2015Explorer
Line Chart!

Sorry, I don't have charge controller output current.
I don't understand what you mean by "If you have cc input current, that would also look cool to see the difference..".
TPA Ahs and Whs are a direct reading and Hourly values are derived by subtracting each hour's ending reading from the prior hour's reading.
Vmp is derived by dividing Hourly Whs by Hourly Ahs.
e.g.,
15 136 25.301 741.7 4.317 123.2 28.54
16 130 28.29 825.5 2.989 83.8 28.04
At hour 16, Ahs = 2.989 = 28.29-25.301 and Vmp = 28.04 = round(83.8/2.989).
There are no moment in time readings because Watts into the CC depend on panel temp, Sun angle and insolation.
HTH;
John

Sorry, I don't have charge controller output current.
I don't understand what you mean by "If you have cc input current, that would also look cool to see the difference..".
TPA Ahs and Whs are a direct reading and Hourly values are derived by subtracting each hour's ending reading from the prior hour's reading.
Vmp is derived by dividing Hourly Whs by Hourly Ahs.
e.g.,
15 136 25.301 741.7 4.317 123.2 28.54
16 130 28.29 825.5 2.989 83.8 28.04
At hour 16, Ahs = 2.989 = 28.29-25.301 and Vmp = 28.04 = round(83.8/2.989).
There are no moment in time readings because Watts into the CC depend on panel temp, Sun angle and insolation.
HTH;
John
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,330 PostsLatest Activity: Oct 30, 2025