My LEDs
FYI: I have been posting updates for those of us who have already read the OP below. For anyone new to the thread, it might be best to skip down below all of these updates, read the body of the post...
Forum Discussion
ryanallie1, right on! I couldn't have said it better.
As far as the double sided tape, I roughened the plastic surface of the light fixture with some fine sandpaper and haven't had any come loose since. I have had some LEDs fail but even with 3 LEDs out you hardly notice the difference in brightness.
As far as the double sided tape, I roughened the plastic surface of the light fixture with some fine sandpaper and haven't had any come loose since. I have had some LEDs fail but even with 3 LEDs out you hardly notice the difference in brightness.
