My LEDs
FYI: I have been posting updates for those of us who have already read the OP below. For anyone new to the thread, it might be best to skip down below all of these updates, read the body of the post...
Forum Discussion
I had a MR16 fixture led light that failed. I busted apart the glass casing to determine its failure. Besides the leds the light contained a resistor and a bridge rectifier IC. The rectifiers allow the light fixture to be powered reverse polarity and still work. In my case the resistor was poorly soldered and it came loose. After soldering the resistor back in, the leds worked again.
Sal
Sal
