My wiring harness for tow vehicle needs help?
I had to make up two wiring harnesses with connectors for my tow vehicle. They've been used a couple of years and are still okay. One is a four pin. Other is a two pin connector. Inset photo is...
Forum Discussion
Great! I've got some of the 2242 tape. I didn't know how it was supposed to be used.
Agreed. Heat shrink tubing would be a good starting point.
But I don't have time or want to un-solder the wire to install heat-shrink.
Next time I'll remember to use heat shrink tubing AND the 2242 tape.
But for now, I'll wrap with the 2242 tape.
As illustrated at the university of YouTube
Agreed. Heat shrink tubing would be a good starting point.
But I don't have time or want to un-solder the wire to install heat-shrink.
Next time I'll remember to use heat shrink tubing AND the 2242 tape.
But for now, I'll wrap with the 2242 tape.
As illustrated at the university of YouTube
