Need advice with wheel bearing issue
Greetings everyone, I'm in need of a little advice. I have a new to me 2008 Starcraft. I've pulled all the wheels and hubs to take a look at the bearings and repack etc, everything looks good. Howe...
Forum Discussion
MEXICOWANDERER wrote:Yeah, I'll argue against this approach. All you'll end up doing is removing material and you'll have a sloppy fit. A very slight press-on fit is just fine, but you don't want a fit such that you have to drive it on with a hammer and drift.
Use a long strip of emery paper and shoe-shine the spindle. Try to get it reasonably even just for drill. This is a cheap fix that few ought to argue against.
