Need advice with wheel bearing issue
Greetings everyone, I'm in need of a little advice. I have a new to me 2008 Starcraft. I've pulled all the wheels and hubs to take a look at the bearings and repack etc, everything looks good. Howe...
Forum Discussion
I do accurate (.001) lathe machining all the time w/ a dial calipers.
But you don't need to mic it,....you already know its too tight.
I would emery strip it down to a hand slip fit like they are supposed to be. You should not have to force a bearing onto a spindle.
But you don't need to mic it,....you already know its too tight.
I would emery strip it down to a hand slip fit like they are supposed to be. You should not have to force a bearing onto a spindle.
