Forum Discussion
StewB
Jan 30, 2015Explorer
Not knowing much of anything about how to wire this up, I assumed -
Each pos and neg off of each panel to a post on the back of the mounting frame with 10 gauge wire.
Then an 8 gauge pos and neg run about 15 ft to the controller mounted inside the cabin.
Then an 8 gauge 16 ft run to the batteries.
4 100 amp 12V Batteries wired in parallel with 4awg cable to posts (neg off last battery pos of first)
Each pos and neg off of each panel to a post on the back of the mounting frame with 10 gauge wire.
Then an 8 gauge pos and neg run about 15 ft to the controller mounted inside the cabin.
Then an 8 gauge 16 ft run to the batteries.
4 100 amp 12V Batteries wired in parallel with 4awg cable to posts (neg off last battery pos of first)
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,284 PostsLatest Activity: Jul 17, 2025