need help with BRC-10 furnace
Hi, My BRC-10 furnace lights and gives heat but is only controllable by turning heater knob up then down once warm, then up again. Its in a 1978 Scamper. I know it's old but the furnace works very w...
Forum Discussion
Had a similar problem on my 73. Got a home style control that has the safety thermocouple for a standing pilot and works off 18 volts. Tested the valve on 12 volts DC and it works fine. Put a thermostat on the wall, old style heat only and wired it up. It draws very little current. It has been working for over 3 or 4 years. Even in Alaska where we ran the heat many nights. Works for me.