New Morningstar PS-30M gen3 solar controller
Update: much of the grief described was due to a bad firmware file which Morningstar posted on their website. They apparently posted a very old v1 firmware, marked as v5. They themselves has issues wi...
Forum Discussion
sure looks there are three high voltage disconnects.
One If the solar input open-circuit voltage (Voc) exceeds the 60 Volt maximum rating, the array will remain disconnected until the Voc falls safely below the maximum rating.
Another is for max batt V - solar is disconnected
and finally one for load - load is disconnect
One If the solar input open-circuit voltage (Voc) exceeds the 60 Volt maximum rating, the array will remain disconnected until the Voc falls safely below the maximum rating.
Another is for max batt V - solar is disconnected
and finally one for load - load is disconnect
