3 tons wrote:
Traveler7 wrote:
Ok- so battery ran all night with a light load and maintained 12.6, This AM the controller is putting 2.2 amps avg. in Float Mode and cycling the battery to 15.5 or so and then letting it drop to 14.4 or so....seems effective?
The 15.5v seems too high, but I wonder if this is actually the controller input voltage?
You may be right about this- all my readings are off the screw posts so and that is where the Controller is attached as well.
I'm going to move the MMeter to the other terminals to get a "Clean" reading now.
