Forum Discussion
DrewE
Dec 10, 2017Explorer II
By "metal bar" supporting the cabover, are you talking about the metal molding track around the edge? That's just there to cover the junction between the side and the front/top/bottom parts of the cabover; it has a vinyl strip in the middle and underneath that there's a screw every couple of inches or so. It's not a structural piece.
Frankly, it looks like there may be a good bit of reconstruction work needed, unfortunately, particularly if it's sat in this condition for awhile. The passenger side wall looks to be in not great shape, and I'm suspicious that the bunk board is also none too sound as water tends to collect at the lower points. I hope that's not the case, of course, but...
Frankly, it looks like there may be a good bit of reconstruction work needed, unfortunately, particularly if it's sat in this condition for awhile. The passenger side wall looks to be in not great shape, and I'm suspicious that the bunk board is also none too sound as water tends to collect at the lower points. I hope that's not the case, of course, but...
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,193 PostsLatest Activity: Jan 26, 2025