Noisy Transfer Switch
I have a Progressive Dynamics PD52 transfer switch in the MH. It is mounted under the bed. It is so noisy it will drive you crazy and keeps me awake with the loud buzzing. The dealer replaced it once ...
Forum Discussion
I have seen a number of threads on this site and irv2 about humming PD52 ATS's. Isolating with rubber seems to be at least a partial solution. Also there are specific orientations for the switch stated in the installation manual. Not sure what the difference is between the PD52 and the PD5200, but here is the 5200 manual which is what we have.
PD 5200/5300 manual
Our 5200 has only a very very light hum even with it being mounted a basement back steel wall in our electronics bay.
PD 5200/5300 manual
Our 5200 has only a very very light hum even with it being mounted a basement back steel wall in our electronics bay.
