rundogdave wrote:
O.k., so I tried to reset the board per these instructions, http://norcoldparts.com/blog/norcold-refrigerator-in-lockout-mode-do-you-need-to-reset-your-power-board-/, no joy. I have the new style board. Still flashing 5 times. Swapped the only connections that I could have crossed during re-assembly, and no change. Checked voltage at the lower right hand pin marked 12vdc, and got 18 volts. Is that normal? I'm really lost. Don't know how I could have installed the cooling unit wrong, but I'm no expert.
The Voltage is tested at the 2 connections YOU make to the board. Ground(neg) and 12 volt positive. Do those 2 wires have this voltage? To reset you may have to ground that pin for at least 30 seconds before it resets. Doug