Norcold 8W1203 Liop code
A friend had flat on the way down to Mission TX. Found the LI-OP Code on the Norcold. I am not sure if it had anything to do with the flat and being jacked up to repair the tire making it un-level. Bu...
Forum Discussion
CT_WANDERER wrote:
Can stop replies to this, as I was not given good information, to start with. He has nothing at all showing on the eyebrow. Total off inside,but has 12V at the input terminals and the 12V fuse on the main board. No 12V anywhere at the recall box. And can not even get the on/off switch to work. I think he has bigger problems than I want to miss with. Thanks for every ones help. Gary
I thought he has the LiOP code? If so, on HIS design of the recall box, the recall box MUST be functional to get any power out and in to the recall box. The FIRST generation of the Recall box did NOT interface with the Rear control board. IF the first Generation Recall failed you had NO power to the Refer at all and did not have the LiOP code. Doug
