Norcold 8W1203 Liop code
A friend had flat on the way down to Mission TX. Found the LI-OP Code on the Norcold. I am not sure if it had anything to do with the flat and being jacked up to repair the tire making it un-level. Bu...
Forum Discussion
Doug, he told me somewhere between his home and getting to TX, he had the Liop code on his refer. When I went over there Eyebrow was completely blank. I could not get it to even show the Liop, that he said he had. His 12V power supply enters the main board on the 12V terminals. I can track 12V past the 12 fuse. I have no power going to the recall box. I can not turn the system on. If I am understanding this right, the way it is setup here, the recall box get it power from the main board. The Red and Blue wires on the recall box goes to the Main Board on the two terminal right next to the P1 terminal strip to the left. There is no 12V power on these terminals.
He has told me that he had a LIOP code and there was at one time the red LED on the recall box. He also said He removed the recall box trying to find a RV shop that would test it on the way down. Said no one would or could. So he reinstalled the Recall Box. As of now I am not sure he may have caused more problems. Thanks Doug for your help. Gary
He has told me that he had a LIOP code and there was at one time the red LED on the recall box. He also said He removed the recall box trying to find a RV shop that would test it on the way down. Said no one would or could. So he reinstalled the Recall Box. As of now I am not sure he may have caused more problems. Thanks Doug for your help. Gary
