Nuts and bolts. SAE, Metric, or both
I been wrenching on vehicles all my life. It use to be only SAE, then it became a mix of SAE and Metric. I thought they we're going to phase out SAE and go all metric at some point, but it seems like ...
Forum Discussion
MEXICOWANDERER wrote:
11mm for 7/16" and 13mm for 1/2" but then things get squirrely until around 3/4
inch.
I worked a lot with cabinets built on the 32mm system. 32mm is 1 1/4" so it's easy to see 16mm is 5/8".
