Onan Microlite 4000 Issues
I have a Onan Microlite 4000 generator that will run as long as I hold the start switch on but quits as soon as I release the switch. It is also not generating power. Where should I begin to look for ...
Forum Discussion
Have you read the codes? This genset self-analyzes to some extent.
I've had one start and not make the transition to 3600 RPM no-load conditions, codes said to check ignition and fuel systems.
I've had it start, get up to speed, and cut off immediately, codes indicated load electrical problems. In that case I found one of the RV branch circuits had a short to ground.
Codes are a blinking pattern after it quits. Interpretations are in the owner's manual.
I've had one start and not make the transition to 3600 RPM no-load conditions, codes said to check ignition and fuel systems.
I've had it start, get up to speed, and cut off immediately, codes indicated load electrical problems. In that case I found one of the RV branch circuits had a short to ground.
Codes are a blinking pattern after it quits. Interpretations are in the owner's manual.
