Open ground fault on EMS when using generator
I am trying to use a Progressive Industries EMS-PT30X portable surge suppressor with my 2000watt inverter generator. The EMS shows me an error code E2 (open ground). Progressive’s tech support says ...
Forum Discussion
Yes, it's because on a generator the ground and neutral is not connected together like those that are hard wired.
You just need to make a plug (like you described) that has the Neutral and ground shorted together and plug that into the gen or RV.
This is timely, I just installed an EMS in our new TT and need to make one of these plugs. Thanks for the reminder!!
You just need to make a plug (like you described) that has the Neutral and ground shorted together and plug that into the gen or RV.
This is timely, I just installed an EMS in our new TT and need to make one of these plugs. Thanks for the reminder!!
