panel wire AWG to controller
Ok so the ts-MPPT-60 is on its way, I put the card board cut outs on the roof just to make sure the panels fit as I thought and now on to more planning. I check a few voltage drop calculators for t...
Forum Discussion
Hi Jim,
I had a #10 prewire. It made sense to me to go to 33 volts, with four panels in series parallel.
I get about 100 amp-hours per day in June and on December 21 I get 7 amp-hours.
I had a #10 prewire. It made sense to me to go to 33 volts, with four panels in series parallel.
I get about 100 amp-hours per day in June and on December 21 I get 7 amp-hours.
JiminDenver wrote:
Don
It helps to know why people design as they do and what they get out of them.
