Parallel Amps Question
If I have three solar panels in parallel producing 20amps in total down a wire, and then I divide that wire with a Y into two sets of wires, each going to a solar controller's array side, and each con...
Forum Discussion
I'm not quite sure of your installation, but if you are using two controllers in parallel, the currents could differ more because of subtle differences in the thresholds of the controller operation. The wiring resistance if different would make a variation, but might not show up because of controller variations.
As you said, like in horse shoes, real close is good.
As you said, like in horse shoes, real close is good.
