Parallel powermaxes outputs
I emailed Erin Tribble at PowerMax and I asked him if I could parallel the outputs of two 75 amp Boondocker convertors to get 150 amp output . He said "Yes you can tie them together and get 150amps....
Forum Discussion
time2roll wrote:
I might also be curious to change the resistor value. Try half or double and see if the time delay is adjusted. If you could get 2 or 3 hours of absorption you could actually go on a hike or go fishing etc without worry.
47k ohms
Yellow violet orange gold
I tried to get the ohms value of the pot but I have a new Craftsman clamp on meter and it seems to only measure lower resistances , anything higher and it reads OL ------overload
I'll have to read the manual for the multimeter
