PD 9180 needs 20 amp cord?
Hey all, With all this converter talk recently, I noticed that the prog. dyn. PD9180/9280 converter comes with a 20 amp cord and plug. Can't tell if the cord wire is 12awg but probably. Fine. So...
Forum Discussion
BFL13 wrote:
Naio, it will still run, but beware of too long a cord even if it is 12. AC voltage drop below 120 will reduce the amps put out by the converter. ISTR it won't work at all under 105v. Also the other appliances will be sharing with the converter, increasing voltage drop for everything. The microwave will work, but groan and moan.
ISTR I read on here that the air conditioner is different. It won't keep going just groaning, it will fry itself on low voltage.
Ok, I will not run other stuff. I don't have phantom loads in my homemade rig, nor AC.
The fridge is tempting, though... maybe if I let it start before the converter?
