PD 9180 needs 20 amp cord?
Hey all, With all this converter talk recently, I noticed that the prog. dyn. PD9180/9280 converter comes with a 20 amp cord and plug. Can't tell if the cord wire is 12awg but probably. Fine. So...
Forum Discussion
joebedford wrote:BFL13 wrote:joebedford wrote:
My 100A converter has a 20A plug.
Which brand/model is it? Some have PF and some don't. Be interesting if it has PF and a 20a plug at that level.
(It came with the RV so don't jump on my for having a:
WFCO 68100
spec sheet says:
Input: 105-132 VAC, 60 Hz, 1620 W
The 68100 is a good converter (NOT your average WFCO!) and it does have PF correction. In my thread about gens and converters, that unit was discussed and it turned out the 1620 was at 13.6v. When at 14.4v it should be more like 1710.
As seen in this thread, 1710 gets it into 20a territory
