PD or Iota for my upgrade?
I'm thinking about a converter and battery upgrade. The batteries will be wet cell lead acid 6 volt Possible T-105s or the 230AH, EGC2 from Sam's club. I'll probably go for four. (Does nayone have...
Forum Discussion
wa8yxm wrote:
There is a slight issue with photos but that looks like one WELL BUILT device.
The photos came from my Photoshop notes on top of the photo, where I can blow up the vector text to read it when working. I saved as JPG, and checked that I could read the JPG, but somewhere the res was reduced.
One thing you can get off the photos is the pinout/connection for the remote. It's marked - LED, Switch and Ground. The LED lead goes to the positive lead of your LED and the other LED lead goes to the Ground lead . Your switch goes between Switch and ground. Shorting the Switch lead to ground causes the PD to change modes (brief goes into Boost mode, 3 secs goes to normal and longer than 6 goes to float) and the LED will flash to indicate the mode you are in. It uses modular connector (phone handset).
