PD Vs. WFCO
So my plans have been to replace the WFCO converter in my 2015 20fw with a Progressive Dynamics retro-fit unit that essentially replaces the converter using the same 120v/12v power center. Part of th...
Forum Discussion
time2roll wrote:
I think #4 wire is the max the connectors in the WFCO power center will accept. Might even try the wire first and give the WFCO a test before you go PD. If voltage into a low battery stops at 13.6 the WFCO is a fail.
This is my thought as well. I'll go the wire route first since the wire is going in no matter what. I figured the #2 isn't going into the converter so I'll use a lug and reduce it to whatever size will fit into the receptacle on the converter.
