power converter replacement
It appears my WFCO WF-8965 converter has bit the dust. The supply puts out 13.7vdc until a load is applied, then output voltage drops to 3vdc. This is with no battery in the circuit, only on 120vac sh...
Forum Discussion
j-d wrote:
Pic of a PD 4655
Am I correct in thinking that it replaces a PORTION of one or more popular Makes/Models of Converter/Charger?
We have an IOTA that I'd describe as All-In-One. It's OEM, no doubt cheap, and it comprises:
AC Breaker Panel
DC Fuse Panel
Power Converter 120VAC >> 12VDC
House Battery Charger
I can DO Wiring, Cutting, Fitting, Trimming. I anticipate a total nightmare swapping out the IOTA because all the related wiring is cut short. I can barely replace a Breaker let alone connect the wiring we have to a new unit with a different layout.
How do I get that done?
First make sure you have the IQ4 for the Iota if it has the jack for it. Then you don't need to swap it out.
Yes, the whole thing is called a Power Centre and just the converter can usually be swapped out. Or leave it there and install a deck mount converter elsewhere (closer to the batteries is good)
