Forum Discussion
myredracer
Mar 27, 2015Explorer II
Well, I got it done yesterday. Our TT is light grey with black trim, vents, etc and now it REALLY pops. :) But now my arms feel like they are going to fall off. :(
I ended up using a microfiber rag and spraying the 303 onto it. Pretty straightforward but not that easy to keep 100% on the graphics, especially when it narrows down to like 1/4" in some spots and where there is lettering. I bought the large spray bottle and it looks like it will last a very long time. The 303 wipes sound like a good idea and didn't know they make them.
I'm using Mothers synthetic marine wax and it was pretty easy - just a lot of time-consuming area. It's impossible not get get a little overlapping wax on the decals and graphics, but I assume it can't really hurt anything and the important thing is to get the 303 down first.
I ended up using a microfiber rag and spraying the 303 onto it. Pretty straightforward but not that easy to keep 100% on the graphics, especially when it narrows down to like 1/4" in some spots and where there is lettering. I bought the large spray bottle and it looks like it will last a very long time. The 303 wipes sound like a good idea and didn't know they make them.
I'm using Mothers synthetic marine wax and it was pretty easy - just a lot of time-consuming area. It's impossible not get get a little overlapping wax on the decals and graphics, but I assume it can't really hurt anything and the important thing is to get the 303 down first.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,240 PostsLatest Activity: May 01, 2025