Prosine 2.0 will not reset.
After 10 years of faithful service my Pro may be done. I have an error "Prosine internal error #xxxx" on the panel, then "attempting to restart".. but it will not. The inverter switch is on, and ...
Forum Discussion
BFL13 wrote:I'm hoping voltage drop will be less with 24v when running high-wattage draws. See if battery posts stay cool while running high-wattage appliances. Make sure my solar can fully charge the 4 batts. See if solar is more efficient at 24v.
How (and what units) will you measure to determine if the part-24v is better than the all-12 ?
smkettner wrote:Not a bad idea.. thanks.
Consider putting that extra pair of 6v to use as the 12v supply.Use a $40 DC/DC 5a converter to draw off at 24 and keep the 12v house supply charged.
