Prosine 2.0 will not reset.
After 10 years of faithful service my Pro may be done. I have an error "Prosine internal error #xxxx" on the panel, then "attempting to restart".. but it will not. The inverter switch is on, and ...
Forum Discussion
full_mosey wrote:From my diagram there is no 12v bank and a 24v bank. It's either 1-24v bank or 2 -12v banks.
Say you have 4x200W panels;1. 3x200w -> Outback -> 24V bank 2. 200W -> new controller -> 12V bank
mena661 wrote:No. It's present, but disabled for 10 years.
2oldman, will you be removing your present converter?.
greenrvgreen wrote:I'm still not getting this. When my coach was new I had a single 12v battery and everything ran just fine.
make sure my 12v tap to the 24v batt bank was running thick wires. Remember, you're now pulling 12v from half the previous Ah reserve, so Peukert is starting to chuckle.
