Question on new inverter reading
My new 1200 watt pure sine wave inverter arrived yesterday. I just hooked it up to a new group 27 deep cycle. the LED read 12.9 volts. I then plugged a fan into it and turned it on. Voltage immediatel...
Forum Discussion
shastagary wrote:
i am using a xantrex prosine 2.0 it is adjustable for the battery alarm i have it set to 10.8v but the batteries recover from that quickly under a lighter load there is a separate setting for the actual shutdown voltage
10.1 is low i agree there may be a warning on yours before the actual shutdown at 10.1v
Maybe keep in mind that the 10.1 low voltage alarm setting is on the inverter, not at the battery. The actual battery voltage under a heavy load could easily be a 1/2 volt higher than the 10.1 at the inverter, depending on the wiring size and length.
Quit trying to broke what ain't fixed !! :@
